| CNC CONTROLLER | WEIHONG software |
| Easy use CNC System: | Operator simply select material, thickness, and press "Start", the machine will complete the remaining work and give you an ideal part. |
| Dynamic speed control: | Especially present good quality in details of cutting, optimized the trailing made by water stream. |
| Z-Height control: | 1, AUTO TRACKING(optional): work with special height sensor, user no need to care about the height any more. |
| 2, INPUT THICKNESS: User just input thickness of material, the cutter will get the correct height level. |
| 3, SET BY PROGRAM OR BY HAND: user also can programming the Z to work with XY as a 3D cut, or manually move and settle as well. |
| Optimized piercing control: | 1, Pierce start in higher level, to avoid the sand block in nozzle. |
| 2, pierce exactly with water and abrasive together, no damage by high-pressure water. |
| 3, pierce in low pressure(as setting), with lower abrasive feed rate, after pierce shift to high pressure with higher abrasive feed rate. Especially use for thick and breakable material pierce. |
| Free nesting post processor: | Easy load and edit file: dxf(plt,ai,nc,cnc), set origin, combine, lead in/lead out , cut sequence, direction, nozzle compensation… |
| Easy draw with point, arc, polyline, shapes, ellipse, polygon, text... |
| Easy copy, group, break group, array with circle, rectangle... |
| Easy define cut power, feedrate, even tool No. with colored graphic. |
| Dual-pressure: | Pierce in low pressure and cut in high-pressure , optimize cutting in breakable material. |
| | Pierce in low pressure with low abrasive feedrate, then shift to high-pressure with high abrasive feedrate, especially for thick material. |
| | Cut(engrave) with only low pressure(without high-pressure) |
| travel limit protect: | Travel range limit switch protected in X,Y,Y1,Z,A,B(C) axis |
| | Soft limit protected in X,Y,Y1,Z,A,B(C) axis, to avoid any possible accident happen during machining. |
| | Cutter crash protect sensor(optional). |
| Power-break resume: | User can continue the program after power-break, accuracy insured by back to machine reference sensors. |
| High precision control: | Control accuracy 0.001mm(μm control) |
| Ball-screw compensation: | All ball-screw has compensated by laser interferometer. |
| | After the ball screw get abraded, user can input value of backlash compensation, to save precision as original. |
| Auto – abrasive feeder: | Operator can precisely handle the volume of abrasive, just push the volume bar to choose the abrasive volume showing on screen, maximize realize your application. |
| Remote trouble shooting | User can create an internet connection with built-in modem in controller, and manufacturer can remote control the user’s controller to get all information by connecting to user’s I.P address. |
| Third-party pretreatment software Support. | User can direct ask third-party pretreatment software producer such as IGEMS, Metalex, CNC-CUT, Multi-CAM, WardJet, Fast-CAM…, speed and valve control can be defined by program optimized. |
| Cutting-cost-estimate | User can make a fast program simulation, to get total machining time according to the chosen material and thickness data. |
| Trouble-shooting info. | Any issue of program or hardware will be shown on the screen by red color warning information. |
| ※ Extend more applications by setting various parameters. | Open parameter interface can allow user has more options to getting various applications. |
| Z-axis up/down | During cutting, the cutting head can be raise up by setting the raise up height parameter. |
| Break restore return | auto save position and one-click restore. |
| System backup | The system parameters will be auto or manual backup, if any mistake operation or accident, user can restore the system easily. |
| Online update. | free online update by internet remote control. |
| Simulate on other computer | System software can be install on other computer to convenience user to simulate the program without occupying machine |
| Software/Based on | Windows 7 |
| Computer configuration | ISA computer (industrial professional computer) , with “BENQ” LCD screen , DVD,USB,810A ISA main-board,Pentium4-2.6GHz1G EMS memory |
| Suitable file format | dxf. nce. nc. cnc. eng. plt. G-code etc. |
| Matched H/P system | KMT, Accustream, FLOW, etc.(others on request) |
